Installing the Touch Unit
90
Notes on the Laser
Attached Labels
The Touch Unit is a Class 1 laser product that conforms to the IEC/EN60825-1:2014 standard.
The Touch Unit is a Class 1 laser product that conforms to the IEC/EN60825-1:2007 standard. (For North/South
America.)
There are warning labels affixed to the Touch Unit to indicate that it is a Class 1 laser product.
For American Users
The labels contain the following information.
•
Class 1 laser product
•
Warning: Do not open the case. The device contains a high power laser product.
•
Warning:
•
Caution: If this section is opened, class 3B invisible laser radiation will be emitted.
•
Avoid exposure to the radiation beams.
Laser Diffusion Port
The laser beam is diffused from the laser diffusion ports at the back of the Touch Unit.
•
Light source output: Max. 285 W
To Next Page
Loading...
