Setting the display
You can make settings for menus, messages, and the background display in Display from the Configuration menu.
Press [Menu] button > Extended > Display
You can make the following settings in Display.
Operation Settings
Change the menu display position. Select the position in Menu Position.
Do not display messages on the projection screen such as
the source name when the source is changed, or warnings
such as when the internal temperature rises.
*1
Set Messages to Off. (Default: On)
You can check warnings from the indicator status.
s "Reading the Indicators" p.16
Change the background screen display. You can select Blue, Black, or Logo. If no logo has been registered, the Epson logo is displayed.
Display Background: Set the screen background when no image signal is available. (Default: Blue)
Startup Screen: When the projector is turned on, set On to display the user's logo or Off. (Default: On)
A/V Mute: Set the screen displayed
*2
when A/V mute is enabled. (Default: Black)
*1
Displays operation and movement dialogs, lamp replacement messages, Message Broadcasting exiting messages, and the projector ID.
*2When A/V Mute Release is set to A/V Mute, Black is set.
Setting Up
32
To Next Page
Loading...
