(3) Edge Blending
Fine tune overlapping areas to make seamless screen.
Perform this in Edge Blending from the Configuration menu.
Press [Menu] button > Extended > Multi-Projection > Edge Blending
The following screen is displayed.
Operations
a
From the screen above, set Edge Blending, Guide Display, and
Pattern Guide to On.
b
Set Top Edge, Bottom Edge, Left Edge or Right Edge according
to the parts of the image that overlap.
Example: When setting the screen in (1)
(1)
The top and left edges of the projected image overlap, so select Top
Edge and Left Edge, and then set Blending to On.
A guide display indicates the area to which blending will be applied.
Projecting Images
52
To Next Page
Loading...
