Full Display: Adjusts according to the projector's panel size (the
maximum area in which an image can be displayed).
c
Adjust the scale.
You can enlarge up to 1000% and reduce down to 50%.
- +: Enlarges or reduces an image horizontally and vertically at the
same time.
Scale Vertically: Enlarges or reduces an image vertically.
Scale Horizontally: Enlarges or reduces an image horizontally.
d
Adjust the Image Display Range.
Scroll the image using the [
], [ ], [ ], and [ ] buttons, and
adjust the coordinates and size of the image.
Projecting 3D images
By using two projectors, you can project passive 3D images. You need the
following optional items to project and view 3D images. Make sure you
read the notes in the user's guides supplied with the optional items.
• Polarizer (ELPPL01)
• Passive 3D Glasses (ELPGS02A/ELPGS02B)
Attention
Do not stack projectors directly on top of one another and project.
a
This projector arranges the direction of polarizing projection for R
(red), G (green), and B (blue). It is not necessary to inverse left and
right eye G (green) image signals.
When projecting 3D images, set 3D Images to On from the Configuration
menu.
Press [Menu] button > Signal > 3D Setup > 3D Images
The following color modes are available when projecting 3D images. When
projecting using the optional polarizers (ELPPL01), you can view images at
their optimal color tint.
• 3D Dynamic
• 3D Presentation
• 3D Theatre
• 3D Multi-Projection
Projecting Images
55
To Next Page
Loading...
