c
The user ID and password entry screen is displayed.
Enter "EPSONWEB" as the user ID.
The default password is "admin".
a
Enter the user ID even if the password setting is disabled. You
cannot change the user ID.
d
Click Administrator Settings - Manage Certificates from
Network.
e
The Manage Certificates screen appears.
Submenu Name Items or Setting Values
Client Certificate
Refresh/Clear
Issued to
Issued by
Validity period
CA certificate
Refresh/Clear
Issued to
Issued by
Validity period
Self-signed Certificate
Refresh/Clear
Issued to
Issued by
Validity period
Web Server Certificate
Refresh/Clear
Issued to
Issued by
Submenu Name Items or Setting Values
Validity period
a
When installing a certificate, make sure the projector supports
its format. s p.74
Secure HTTP Notes
When Secure HTTP in Administrator Settings from the Network menu is
set to On, security using HTTPS protocol is automatically applied. You can
use this function to increase security between the projector and a Web
browser.
A certificate is used in communication using HTTPS protocol to certify
reliability of the server. Create a server certificate to verify reliability from a
Web browser, and install it on the projector.
If there is no server certificate, the projector automatically creates a self-
signed certificate and communicates. Because this self-signed certificate
cannot verify reliability from a Web browser, a warning about the server's
reliability is generated when the projector is accessed from a Web browser.
Although the security level is decreased when compared to a server
certificate, you can continue to communicate by ignoring the warning.
List of supported certificates
Client Certificate (PEAP-TLS/EAP-TLS)
Item Explanation
Supported format
PKCS#12
Extension
PKCS, P12
Encryption
RSA
Hashes
MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length
512/1024/2048/4096 bit
Network Setup
74
To Next Page
Loading...
