Event ID Cause Remedy
04FF A system error occurred in the projector. Restart the projector.
0891 Cannot find an access point with the same SSID. Set the computer, the access point, and the projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Check that the wireless LAN security settings are correct. s p.68
0893 The WEP/TKIP/AES encryption type does not match.
0894 Communication was disconnected because the projector connected to an
unauthorized access point.
Contact your network administrator for more information.
0898 Failed to acquire DHCP. Check the DHCP server to see if it is operating correctly and check the LAN
cable to see if it is connected correctly. If you are not using DHCP, turn off the
DHCP setting. s p.64
0899 Other communication errors If restarting the projector or EasyMP Network Projection does not solve the
problem, contact your local dealer or the nearest address provided in the Epson
Projector Contact List.
s "Epson Projector Contact List" p.81
089A The EAP authentication type is not the same. Check that the wireless LAN security settings are correct. Also, check if the
certificate is installed correctly. s p.68
089B EAP server authentication failed.
089C EAP client authentication failed.
089D Key exchange failed.
Network Setup
78
To Next Page
Loading...
