d
Select each input source for Left and Right.
a
You can perform the same operations using the following
procedure.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.41
s "Switching to the Target Image by Remote Control" p.42
e
Select Execute, and then press the [ ] button.
To switch the source during split screen projection, start the
procedure from step 2.
Switching the left and right screens
Use the following procedure to switch the projected images displayed on
the left and right screens.
a
Press the [Menu] button during split screen projection.
b
Select Swap Screens, and then press the [ ] button.
The projected images on the left and right are swapped.
Switching the left and right image sizes
a
Press the [Menu] button during split screen projection.
b
Select Screen Size, and then press the [ ] button.
c
Select the screen size you want to display, and then press the [ ]
button.
Projection Functions
61
To Next Page
Loading...
