Correcting Distortion in the Projected Image
You can correct keystone distortion in projected images using one of the
following methods.
• H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
s "H/V-Keystone" p.43
• Quick Corner
Manually correct the four corners independently.
s "Quick Corner" p.43
• Curved Surface
Manually correct distortion that occurs when projecting on a curved
surface, and adjust the amount of expansion and contraction.
s "Curved Surface" p.44
• Point Correction
Corrects slight distortion which occurs partially, or adjusts the image
position in an overlapping area when projecting from multiple projectors.
s "Point Correction" p.57
• Corner Wall
Manually correct distortion that occurs when projecting on a surface with
right angles, such as a square pillar or the corner of a room, and adjust
the amount of expansion and contraction.
s "Corner Wall" p.47
Adjusting Projected Images
42
To Next Page
Loading...
