Top Menu Name Submenu Name Items or Setting Values
Projection Front, Front/Ceiling, Rear, and
Rear/Ceiling
Direction 0 Degree to 180 Degree to -15
Degree
Operation Direct Power On, Sleep Mode,
Sleep Mode Timer, High Altitude
Mode, BNC Sync Termination,
Remote Control Type, Inv
Direction Button, Startup Source
Search, A/V Mute Release, Beep,
Lens Type, Instant Off, and Date &
Time
A/V Settings A/V Output, Monitor Out, and
Audio Settings
Standby Mode Communication On and
Communication Off
HDBaseT Control Communications, Extron
XTP
Multi-Projection Brightness Level, Edge Blending,
Multi-screen, Projector ID
Schedule Settings -
Language 27 languages
Info menu
s p.121
Projector Info Lamp Hours, Source, Input Signal,
Resolution, Video Signal, Refresh
Rate, Sync Info, Status, Serial
Number, Event ID, and HDBaseT
Signal Quality
Version Main, Main2, and Video
Reset menu
s p.122
Reset All -
Reset Lamp Hours -
Reset Memory -
Network menu
Top Menu Name Submenu Name Items or Setting Values
Basic menu s p.117 Projector Name -
PJLink Password -
Web Control Password -
Wired LAN menu s
p.118
IP Settings DHCP, IP Address,
Subnet Mask, Gateway
Address
IP Address Display On and Off
Mail menu s p.118 Mail Notification On and Off
SMTP Server -
Port Number -
Address 1 Setting,
Address 2 Setting,
Address 3 Setting
-
Others SNMP On and Off
Trap IP Address 1, Trap IP
Address 2
-
AMX Device Discovery On and Off
Crestron RoomView On and Off
Control4 SDDP On and Off
Bonjour On and Off
Message Broadcasting On and Off
Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
List of Functions
107
To Next Page
Loading...
