Need help?Do you have a question about the Epson EB-G7900U and is the answer not in the manual?
General| Resolution | 1920 x 1200 (WUXGA) |
|---|---|
| Display Technology | 3LCD |
| Brightness | 7000 lumens |
| Lens Shift | Vertical: ±60% |
| Connectivity | HDMI, VGA, USB, RS-232C |
| Noise Level | 37 dB |
Explains graphical symbols used for safety warnings and precautions.
Safety warnings and precautions specifically for projector installation procedures.
Step-by-step instructions for attaching and removing the projector lens unit.
Configuration of projector settings related to installation and orientation.
How to fine-tune image position to fit the screen, compensating for margins.
Adjusting image position using lens shift for precise screen alignment.
How to change the size of the projected image using zoom.
Steps to adjust the projector's focus for a clear image.
Correcting image warping, especially with short throw lenses, for a distortion-free picture.
Methods for connecting a computer to the projector via various cables.
Connecting various video sources like component and HDMI to the projector.
Outputting images to external monitors and audio to external speakers.
Installing the optional wireless LAN unit for wireless connectivity.
Step-by-step guide on how to power on the projector and initial checks.
Procedure for safely powering down the projector and disconnecting power.
Automatically finding and switching to active input signals for image projection.
Selecting and projecting specific input sources using the remote control.
Methods for correcting keystone and other image distortions.
Adjusting horizontal and vertical keystone distortion independently for image correction.
Correcting distortion by adjusting each of the four corners of the projected image.
Choosing color modes to optimize image quality based on ambient conditions.
Adjusting the image's aspect ratio to match input signals and screen type.
Fine-tuning image colors and brightness for the six primary and secondary colors.
Adjusting image brightness levels and color tones for better halftone reproduction.
Enhancing image resolution for clearer details and textures.
Adjusting brightness and color tone differences between multiple projectors for seamless screens.
Steps to prepare projectors for multi-projection, including ID setup and lens adjustments.
Fine-tuning overlapping areas of multiple projected images to create seamless screens.
Projecting images from two sources simultaneously on the left and right sides of the screen.
Step-by-step guide for setting up and operating split screen projection.
Temporarily disabling video and audio output to focus attention or hide details.
Pausing the projected image to display a still frame or perform operations without showing changes.
Expanding specific areas of the image to view details like graphs and tables.
Managing saved settings and geometric correction values for image and lens adjustments.
Setting up automatic projector operations like power on/off and source switching at scheduled times.
Limiting projector usage by activating password protection for unauthorized access.
Outlines the four types of password protection settings available for projector use.
Step-by-step guide to setting up and entering a password for projector security.
Functions to lock control panel buttons or lens operations to prevent unauthorized changes.
Disabling remote control buttons for lens adjustments to prevent improper changes.
Disabling non-essential buttons on the remote control to prevent operational mistakes.
Security features to prevent projector theft, including security slots and cable points.
Instructions for passing an anti-theft wire lock through the installation point.
Explains how to navigate and operate the projector's configuration menu.
Selecting image quality settings to suit surroundings and ambient conditions.
Adjusting the overall brightness of the projected image.
Adjusting the difference between light and dark areas for image clarity.
Adjusting the intensity or vividness of colors in the image.
Adjusting the color tint of the projected image.
Adjusting the overall tint of the image for accurate color representation.
Enhancing image resolution for clearer details and textures.
Adjusting image brightness levels and color tones for better halftone reproduction.
Splitting the screen to display two images simultaneously.
Restricting access to control panel and remote control functions.
Correcting image distortion for multi-projection setups.
Blending overlapping image edges to create seamless screens in multi-projection.
Solutions for issues like no images, distorted images, or incorrect colors.
Troubleshooting steps when the projector's projection stops unexpectedly.
Addressing image quality issues related to focus, clarity, and distortion.
Resolving interference and distortion problems in projected images.
Correcting image size, aspect ratio, and orientation issues.
Troubleshooting steps for incorrect or dull image colors.
Addressing issues where projected images appear too dark.
Troubleshooting steps for issues occurring when the projector is turned on.
Solutions for when the projector fails to power on.
Solutions for miscellaneous issues like no sound or remote control malfunction.
Diagnosing and resolving problems with the remote control's functionality.
Procedures for cleaning the projector's surface, lens, and air filter to maintain performance.
Steps to clean the air filter and intake vent to prevent overheating and maintain airflow.
Detailed instructions on how to safely replace the projector's lamp unit.
Step-by-step guide for replacing the lamp, including safety precautions.
Instructions for replacing the air filter when cleaning is insufficient or the filter is old.
Tables showing projection distances for various screen sizes with specific lenses.
To Next Page
