Content Playback mode allows you to project images suitable for digital
signage in locations such as museums, showrooms, and stores. You can
project playlists of photos and videos stored in an external memory. You
can use the effects features to change the color and shape of the projected
image.
a
The Content Playback feature uses the USB-A port; this means that
you cannot use the wireless LAN feature at the same time.
Switching to Content Playback Mode
Switch to Content Playback mode to play a playlist.
a
Press the [Menu] button while projecting.
b
Select Content Playback from Settings.
c
Select On, and then press the [ ] button.
A confirmation message is displayed.
d
Restart the projector to enable Content Playback mode.
e
Press the [ ] button on the control panel or the remote control.
The Home screen is displayed.
f
Check that Content Playback mode is enabled.
Playing a Playlist
Content Playback mode allows you to project photos and videos that have
been saved as playlists.
Content Playback Feature
106
To Next Page
Loading...
