Submenu Function
Geometry Cor-
rection
You can correct distortion.
s "Correcting Distortion in the Projected Image" p.64
• Off:
Temporarily cancels the geometry correction.
• H/V-Keystone:
Adjust V-Keystone, V-Balance, H-Keystone, and H-
Balance to correct vertical and horizontal keystone
distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Curved Surface:
Corrects distortion that occurs when projecting on a
curved surface.
• Corner Wall:
Corrects distortion that occurs when projecting on a
surface with right angles.
• Point Correction:
Divides the projected image into a grid and corrects the
distortion by moving the selected point of intersection
from side to side and up and down.
• Memory:
You can save the adjustment value of the geometry
correction and load it when needed.
s "Memory Function" p.110
Split Screen
You can split the screen into two screens.
s "Projecting Two Images Simultaneously (Split Screen)"
p.99
Volume
You can adjust the volume. Setting values are saved for each
source.
Submenu Function
HDMI Link
Sets HDMI Link.
Device Connections:
Displays a list of the devices connected to the HDMI port.
HDMI Link
Enables or disables HDMI Link.
Audio Out Device:
When the projector is connected to an AV amplifier, select
whether to output audio from the external speakers
connected to the projector or to output audio from the AV
amplifier’s speakers.
Power On Link:
Set the operation to perform when turning on the projector
or a connected device.
• Bidirectional: Turns on the connected device when the
projector is turned on, or turns on the projector when the
connected device is turned on.
• Connected Device_PJ: Turns on the projector when the
connected device is turned on.
• PJ_Connected Device: Turns on the connected device
when the projector is turned on.
Power Off Link:
Set whether or not to turn off the connected device when
the projector is turned off.
Link Buffer:
If HDMI Link is not working properly, changing this setting
may improve linking operations.
Lock Setting
Control Panel Lock: You can use this to restrict operation
of the projector's control panel.
s "Control Panel Lock" p.117
Lens Lock: When set to On, [Lens Shift], [Zoom],
and [Focus] button operations on the remote control are
disabled.
s
"Lens Lock" p.118
List of Functions
144
To Next Page
Loading...
