Details of Updated Optional Accessories (Version 2.00)
18
Concave surface Convex surface
A
Screen
B
Center point of the circle created by the arc of the curved surface
L Projection distance
R Radius of the circle created by the arc of the curved surface
Vertical lens shift: Home
position (R/L)
Vertical lens shift: Top
(R/L)
Horizontally curved
surface (concave)
- 2.84
Horizontally curved
surface (convex)
- 3.52
Vertically curved surface
(concave)
- 2.09
Vertically curved surface
(convex)
- 3.52
ELPLX02 Corner Wall Correction Range
The following table shows the maximum angle (α) within which the projector
can move during corner wall correction.
Concave surface Convex surface
A
Screen
α Angle of possible projector motion
Vertical lens shift: Home
position
Vertical lens shift: Top
Horizontal corner
(concave)
- -
Horizontal corner
(convex)
- -
Vertical corner (concave) - -
Vertical corner (convex) - -
ELPLX02 Projection Distance
You can calculate the projection distance using the following formulas.
a
You can also use the projection distance calculator to automatically
calculate various distances for you.
https://epson.com/
• Screen aspect ratio: 16:10 or 16:9
• Distance (cm) = Screen width (cm) × 0.35
• Screen aspect ratio: 4:3
• Distance (cm) = Screen width (cm) × 0.42
To Next Page
Loading...
