c
Select Scale, and then press the [ ] button.
d
Turn on Scale.
(1)
Select Scale, and then press the [
] button.
(2)
Select Auto or Manual, and then press the [
] button.
Auto: Automatically adjusts the clipped area according to the adjustment
values in Edge Blending and Tiling. You do not need to perform any steps
after step 6.
Manual: Allows you to adjust the clipped area manually.
(3) Press the [Esc] button to return to the previous screen.
a
If auto adjustment does not work for the clipped image, adjust
the aspect ratio, and then select Auto.
s "Changing the Aspect Ratio of the Projected Image "
p.78
e
Set Scale Mode.
(1)
Select Scale Mode, and then press the [
] button.
(2)
Select Zoom Display or Full Display, and then press the [
] button.
Zoom Display: Adjusts according to the image currently displayed.
Enlarge
Move
Full Display: Adjusts according to the projector's panel size (the
maximum area in which an image can be displayed).
Enlarge
Move
(3) Press the [Esc] button to return to the previous screen.
Multi-Projection Function
103
To Next Page
Loading...
