Features of Firmware Version 2.10
6
Refer to these sections for a summary of the updated features of projector
firmware version 2.10.
gg Related Links
• "Updates to Supported Software (Version 2.10)" p.6
• "Updates to Projector Menus (Version 2.10)" p.6
• "Updates to User Operations (Version 2.10)" p.6
Updates to Supported Software (Version 2.10)
Version 2.10 firmware supports the following software in addition to the
existing optional software available for your projector.
• Epson Projector Professional Tool Version 1.2
See Epson Professional Projector Tool Operation Guide for more details.
Updates to Projector Menus (Version 2.10)
The following projector menus change in firmware version 2.10.
• The projector can hold the last position of the cursor in the projector menu.
• The EDID menu is added to the Signal menu.
• The Maintain Aspect Ratio menu is added to the Settings menu.
• The Reset All (Factory Default) menu is added to the Reset menu.
• The color temperature is specified with Kelvin in all color modes.
• Cross-hatching test patterns in red, green and blue are available.
gg Related Links
• "Cursor Position Memory of Projector Menus" p.21
• "EDID Menu" p.21
• "Maintain Aspect Ratio Setting" p.21
• "Reset All (Factory Default) Menu" p.22
• "Kelvin in Color Temperature" p.22
• "Color of Cross-hatching Test Pattern" p.23
Updates to User Operations (Version 2.10)
The following projector operations change in firmware version 2.10.
• You can adjust the focus while displaying the lens calibration message.
gg Related Links
• "Focus Adjustment While Displaying the Lens Calibration Message" p.36
To Next Page
Loading...
