c
Connect by entering the address of the connected projector in the
URL field of the Web browser.
The Home screen is displayed.
A
Basic Control
s "Basic Control Screen" p.219
B
OSD Control Pad
s "OSD Control Pad Screen" p.220
C
Test Pattern
s "Test Pattern Operation Screen" p.222
D
Remote Camera Access
s "Remote Camera Access screen" p.223
E
Advanced
You are moved to the Advanced screen.
F
Status Information
s "Status Information Screen" p.223
G
Lens Control
s "Lens Control Screen" p.221
a
• When performing the functions from the Home screen, you
may be prompted to enter the user name and password.
The following two types of user names and passwords are
available.
Remote: The user name is "EPSONREMOTE" and the default
password is "guest".
Web Control: The user name is "EPSONWEB" and the default
password is "admin".
• You cannot change the user name. You can change the
password in the Network menu from the Configuration menu.
s
Network - Basic - Remote Password, Web Control
Password p.157
• You must enter the user name for Web Control Password
even when the password is disabled.
• You can only set the following items from the Advanced
screen.
Monitor Password (up to 16 single-byte alphanumeric
characters)
s
Network - Basic - Monitor Password p.157
IPv6 Settings (Manual)
s Network - IPv6 Settings p.158, p.162
Add HTTP port (for the port number used for Web control,
use anything except for 80 (default), 843, 3620, 3621, 3625,
3629, 4352, 4649, 5357, 10000, 10001, 41794)
s Network - Others p.164
Basic Control Screen
You can perform basic projector operations.
Monitoring and Controlling
219
To Next Page
Loading...
