If a problem occurs with the projector, you can display the Help screen to
assist you. You can also set the projector to an appropriate state by
answering the questions.
a
Before displaying the help screen, assign Help to a User Button.
s Settings - User Button p.123
a
Press the [User] button to which Help was assigned.
The Help screen is displayed.
b
Select a menu item.
c
Confirm the selection.
Questions and solutions are displayed as shown on the screen below.
Press the [Menu] button to exit Help.
a
See the following if the Help function does not provide a
solution to the problem.
s "Reading the Indicators" p.148
Using the Help
147
To Next Page
Loading...
