Name Function
J
[ ][ ][ ][ ]
buttons
• Adjust the lens shift.
s "Adjusting the Position of the Projected Image
(Lens Shift)" p.31
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu" p.116
• When using the optional wireless mouse receiver,
pressing these buttons moves the pointer.
s "Optional Accessories" p.205
K
[ ] button
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu" p.116
• Acts as a mouse's left button when using the optional
wireless mouse receiver.
s "Optional Accessories" p.205
L
[On-Screen] button
Shows or hides the Configuration.
M
[Zoom] button
Press to adjust the zoom.
s "Adjusting the Image Size" p.33
N
[Focus] button
Press to adjust the focus.
s "Correcting the Focus" p.34
O
[Lens Shift] button
Press to adjust the lens shift.
s "Adjusting the Position of the Projected Image (Lens
Shift)" p.31
If pressed for more than five seconds, the lens position
moves to the home position.
P
Numeric buttons
• Enter the Password.
s "Setting Password Protection" p.109
• Use this button to enter numbers in Network settings
from the Configuration menu.
Name Function
Q
[ID] button
Hold down this button and press the numeric buttons to
select the ID for the projector you want to operate using
the remote control.
s "ID Settings" p.37
R
[ID] switch
Use this switch to enable (On)/disable (Off) ID settings for
the remote control.
s "ID Settings" p.37
S
Remote port
Connects the optional remote control cable set and
outputs signals from the remote control.
s "Optional Accessories" p.205
When the remote control cable is plugged into this remote
port, the remote control light-emitting is disabled.
T
[ ] button
Displays the Info menu from the Configuration menu.
s "Info Menu (Display Only)" p.136
U
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection" p.109
V
[[][]] buttons
• Moves to the previous or next image file when
projecting images from a computer connected via a
network.
• When using the optional wireless mouse receiver, you
can change the PowerPoint file page during projection
by pressing the page up/page down buttons.
W
[Geometry] button
Corrects distortion in the projected image.
s "Correcting Distortion in the Projected Image"
p.55
X
[Test Pattern] button
Displays a test pattern.
s "Displaying a Test Pattern" p.29
Y
[Distortion] button
Press to correct distortion.
s "Correcting Distortion (Image Warping)" p.34
Z
[Shutter] button
Press to turn the image on or off temporarily.
s "Hiding the Image Temporarily (Shutter)" p.100
Part Names and Functions
20
To Next Page
Loading...
