Connecting Image Sources
To project video images, connect to the projector using one of the following methods.
A
When using an optional component video cable (D-sub/component converter)
s "Optional Accessories" p.205
Connect the component output port on the image source to the projector's Computer port.
B
When using a commercially available component video cable (RCA) and a BNC/RCA adapter
Connect the component output port on the video equipment to the projector's BNC port (R/Cr/Pr, G/Y, B/Cb/Pb).
C
When using a commercially available BNC video cable (SDI input)
Connect the SDI port on the image source to the projector's SDI input port.
D
When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI port.
Connecting Equipment
43
To Next Page
Loading...
