Remote control operating range
a
To restrict reception of the operation signals from the remote control,
set Remote Receiver.
s
Settings - Remote Receiver p.123
Connecting a cable to the remote control
You can make operations securely with the optional remote control cable
set when you use multiple units of this projector in the same place or when
there are obstacles around the remote receiver.
s "Optional Accessories" p.205
a
• When the remote control cable is plugged into the Remote port, the
remote receiver on the projector is disabled.
• You can also connect the optional HDBaseT transmitter and remote
control with the cable to control the projector.
s "Connecting an HDBaseT Transmitter" p.47
Part Names and Functions
23
To Next Page
Loading...
Need help?
General