Epson EB-L25000unl User Manual

Other Settings
Settings related to basic operations
Purpose Setting Methods
To start/stop projection by turning
on/off the main power switch or
plugging in or unplugging the
power plug of the projector.
• When Direct Power On is set to On, the
projector can start projecting when power is
supplied. (Default value: Off)
s Extended - Operation - Direct Power
On p.125
• The projector can be powered off directly by the
breaker because it supports the direct shutdown
function.
To disable buzzer beeps generated
when the projector is powered on/
off.
Set Beep to Off. (Default value: On)
s Extended - Operation - Advanced - Beep
p.125
To turn off the power by pressing
the [t] button once.
Set Standby Confirmation to Off. (Default value:
On)
s Extended - Display - Standby Confirmation
p.125
Settings related to display
Purpose Setting Methods
To change the menu position. Change the settings of Menu Position.
s Extended - Display - Menu Position p.125
To change the menu direction. Change the settings of OSD Rotation.
s Extended - Display - OSD Rotation p.125
To prevent the display of menus,
messages, or warnings on the
screen.
Each time you press the [On-Screen] button on
the remote control, menus or messages and so on
are shown or hidden. While menus are hidden,
you cannot operate the Configuration menu
(except switching the color mode and input
source).
To disable the display of the
message on the projection screen
when switching the source.
Set Messages to Off. (Default value: On)
s Extended - Display - Messages p.125
You can confirm warning by the display of the
indicator.
s "Reading the Indicators" p.148
Dialogs related to operations and behaviors, laser
warnings, termination of Message Broadcasting,
and projector ID are displayed.
To reduce the display delay of the
image.
Set Image Processing to Fast 1 or Fast 2.
s Signal - Advanced - Image Processing
p.121
To register and save the settings of
the projected image.
Set Memory.
s "Memory Function" p.103
You can save the following settings.
• Memory: Some settings in the Configuration
menu
• Lens Position: Adjustment values of the lens
shift, zoom, focus, and distortion
• Geometry Correction: Adjustment value of the
geometry correction
Installing the Projector
40

Epson EB-L25000unl Specifications

General

Brand	Epson
Model	EB-L25000unl
Category	Projector
Language	English