Projector Reset Options - Reset Menu
175
You can reset most of the projector settings to their default values using the
Reset menu.
Setting Options Description
Reset Memory — Resets the name and settings of a saved
memory.
Refresh Mode Timer
Start
Select Start to clear an afterimage that
remains in the projected image and turn
off the projector after the specified time.
Press any button to cancel Refresh Mode.
Light Source
Calibration
Select options to perform light source
calibration to maintain the color balance
of the projected image.
Run Now Set to On to start light source calibration
right away. You may not be able to start
the calibration depending on the
environmental temperature. (Wait 20
minutes after turning on the projector
before performing light source
calibration for maximum accuracy.)
Run Periodically Set to On to perform light source
calibration periodically every 100 hours
of usage.
Setting Options Description
Schedule Settings Moves to the Schedule Settings screen.
Reset All Config — Resets most of the projector settings to
their default values.
Reset All (Factory
Default)
— Resets all of the projector settings to their
default values. Set your password if
needed.
You cannot reset the following settings using the Reset All Config option:
• Input Signal
• Memory
• Content Playback
• User's Logo
• Display Background *
• Startup Screen *
• Color Uniformity
• Color Matching
• Schedule Settings
• Language
• Date & Time
• Network menu items
• Light Source Hours
• Password
• Password Protection settings
* Available when you have saved a user's logo.
You cannot reset the following settings using the Reset All (Factory Default)
option:
• Light Source Hours
• Password
• Password Protection settings
To Next Page
Loading...
