Saving a User's Logo Image
90
g
For the 400x300 size, use the arrow buttons to surround the image area
you want to use as the user's logo, and then press [Enter].
You see a prompt asking if you want to select this image area.
h
Select Yes and press [Enter]. (If you want to change the selected area,
select No, press [Enter], and repeat the last step.)
You see the User's Logo zoom factor menu.
i
For the 400x300 size, select a zoom percentage, press [Enter], select
Yes, and press [Enter].
The user's logo is overwritten and a completion message is displayed.
j
Press [Esc] to exit the message screen.
k
Select the Extended menu and press [Enter].
l
Select Display and press [Enter].
m
Select when you want to display the User's Logo screen:
• To display it whenever there is no input signal, select Display
Background and set it to Logo.
s Extended > Display > Display Background
• To display it whenever you turn the projector on, select Startup
Screen and set it to On.
s Extended > Display > Startup Screen
To prevent anyone from changing the User's Logo settings without first
entering a password, set the User's Logo Protection setting to On in the
Password Protection setting menu and set the password.
gg Related Links
• "Selecting Password Security Types" p.100
To Next Page
Loading...
