231
Related tasks
Saving Settings to a USB Flash Drive
Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Transferring Settings from a Computer
Replacing the Air Filter
Cleaning the Air Filter
Viewing Projector Status Information
You can monitor the projector's status and view error information on the projected screen.
1. Turn on the projector.
2. Press the right arrow button on the control panel.
3. Press the left or right arrow button to view different categories of information.
• Status Information: the projector's operating status
• Source: input signal information
• Signal Information: input digital signal information
• Network Wired: wired LAN settings
• Network Wireless: wireless LAN settings
• Maintenance: operating time for the projector and light source
• Version: projector's firmware version
Projector Status Display Messages
Parent topic: Solving Problems
Projector Status Display Messages
Categories on the status display screens let you view information about the projector and its operation.
Status Information category
Information Description
System See the System status information table at the end
of this topic
To Next Page
Loading...
