Epson EB-L610U - Page 16

Projector Parts and Functions
16
Name Function
B
[Computer] button Switches the image source between the Computer1 and
Computer2 ports.
C
[HDMI] button Switches the image source between the HDMI1 and
HDMI2 ports.
Switches the image source from the HDBaseT input
port (EB‑L615U/EB‑L610U/EB‑L510U/EB‑L610W).
D
Numeric buttons Enters numbers in the projector's menu while holding
down the [Num] button.
E
[Auto] button Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog
RGB signal from the Computer1 or Computer2 port.
F
[Aspect] button Changes the aspect mode.
G
[Num] button Hold down this button to enter numbers using the
numeric buttons.
H
[Menu] button Displays and closes the projector's menu.
I
Arrow buttons Selects menu items while displaying the projector's
menu or help.
J
[Enter] button [ ] Enters the current selection and moves to the next level
while displaying the projector's menu or help.
K
[User] button Performs settings assigned in the User Button setting
in the projector's Settings menu.
L
[Page] up/down
buttons
Controls page up and down on your computer when
you connect a projector and computer over the
network.
Displays the previous or next screen while using the PC
Free feature.
M
[E-Zoom] +/–
buttons
Zooms in or zooms out the image area.
N
[A/V Mute] button Turns the video and audio on or off temporarily.
O
[Split] button Projects two images from different image sources
simultaneously by splitting the projected screen.
P
[Home] button Displays and closes the Home screen.
Q
[Freeze] button Pauses or resumes images.
Name Function
R
[Volume] up/down
buttons
Adjusts the speaker volume.
S
[Pointer] button Displays the on-screen pointer.
T
[Esc] button Stops the current function.
Moves back to the previous menu level while
displaying the projector's menu.
U
[ID] button Hold down this button and press the numeric buttons
to select the ID for the projector you want to operate
using the remote control.
V
[Color Mode] button Changes the color mode.
W
[Link Menu] button Displays the settings menu for the device linked to the
projector's HDMI ports.
X
[LAN] button Swithces the image source between the network
connected devices.
Y
[USB] button Selects the USB-A port as the image source.
Z
[Source Search]
button
Swithces to the next input source.
a
Remote control light
emitting area
Outputs remote control signals.
gg Related Links
• "Image Aspect Ratio" p.58
• "Color Mode" p.63
• "Input Signal Settings - Signal Menu" p.153
• "Projector Setup Settings - Extended Menu" p.158
• "Home Screen" p.36
• "Projecting Two Images Simultaneously" p.73
• "Using the Remote Control as a Pointer" p.88
• "Projecting a PC Free Presentation" p.76
• "Using the Projector on a Network" p.104