Adjusting the Image Color
66
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Advanced and press [Enter].
e
Select Gamma and press [Enter].
f
Select and adjust the correction value.
When you select a smaller value, you can reduce the overall brightness
of the image to make the image sharper. When you select a larger value,
the dark areas of images become brighter, but the color saturation for
lighter areas may become weaker.
a
• If you selected DICOM SIM as the Color Mode setting in the
projector's Image menu, select the adjustment value according
to the projection size.
• If the projection size is 80 inches or less, select a small value.
• If the projection size is 80 inches or more, select a large
value.
• Medical images may not be reproduced correctly depending on
your settings and screen specifications.
g
If you want to make finer adjustments, select Customized and press
[Enter].
To Next Page
Loading...
