Epson EB-L630U - Page 137

Wireless Network Projection
137
(EB‑L735U/EB‑L730U/EB‑L635SU/EB‑L630SU/EB‑L630U/EB‑L530U
).
h
Select the Wireless LAN menu and press [Enter].
The projector starts searching for access points.
a
You can also search for access points using the Search Access
Point setting manually.
i
Select the access point you want to connect to.
a
If you need to assign the SSID manually, select SSID to enter the
SSID.
j
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings to
set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
Subnet Mask, and Gateway Address as necessary.
k
To prevent the IP address from being displayed on the network
information screen, set the IP Address Display setting to Off.
l
Select the Network Projection menu and press [Enter].