Attention
Wh
en installing the projectors, make sure hot air from the exhaust vent does not go
into the air intake vent of another projector.
a
Connect the projector to the computer using the HDMI cable, and then
conn
ect the HDMI1 port and HDMI Out port of the projectors using the
HDMI cable.
•
e imag
e is output from the HDMI Out port only when HDMI1
is selected as the image source.
•
If you are connecting three or four projectors in a daisy-chain,
connect the projectors as shown.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Color Mode setting to Multi-Projection in the projector's
I
mage menu for all of the projectors.
d
Select the necessary HDMI L
ink > HDMI Out Setting setting in the
projector's Settings menu. See the list of settings for more details.
Setting Item
A B C
First projector
to co
nnect to
the device
Projectors in the
middle
Terminal
projector
HDMI Out
Set
ting
Power On/O
Link: On
Terminal End:
O
Power On/O
Link: On
Terminal End:
O
Power On/O
Link: On
Terminal End:
On
•
A
udio i
s output from all projector speakers. You can adjust the
audio volume for each projector.
•
You can only control the connected projector from the terminal
projector using the HDMI Link function.
e
Select the necessary settings in the projector's M
u
lti-Projection menu.
f
Press [Menu] or [Esc] to exit the menus.
is may not work if ve or more projectors are connected in a
d
aisy-chain or if the settings are not correct.
Details of User Operation Change (Version 1.10)
11
To Next Page
Loading...
