126
3. Select the Image > Advanced menu and press Enter.
4. Select the Gamma setting and press Enter.
You see a screen like this:
5. Select and adjust the correction value.
Note: If you set the Color Mode to DICOM SIM in the projector's Image menu, select the adjustment
value according to the projection size. When you select a smaller value, you can reduce the overall
brightness of the image to make the image sharper. When you select a larger value, the dark areas
of images become brighter, but the color saturation for lighter areas may become weaker.
6. If you want to make finer adjustments, select Custom and press Enter.
To Next Page
Loading...
