190
Setting Options Description
Blanking Top
Bottom
Left
Right
Hides an area of the projected
image that you select using the
arrow buttons
Available when Content
Playback is set to Off in the
projector's Settings menu.
Color Space Auto
BT.709
BT.2020
Sets the conversion system for
the color space. Not available
when Color Mode setting is set to
BT.709 or DICOM SIM
Dynamic Range Dynamic Range Changes the range of dark and
bright areas in images; choose
from Auto (recommended), SDR,
HDR10, or HLG.
Signal Status Displays the detected input
image signal.
HDR10 Setting Changes the PQ (Perceptual
Quantizer) curve of the dynamic
range using the HDR PQ
method. This setting is only
displayed when Dynamic Range
is set to Auto and Signal Status
is set to HDR10, or when
Dynamic Range is set to
HDR10.
HLG Setting Changes the HLG (Hybrid Log
Gamma) curve of the dynamic
range using the HDR HLG
method. This setting is only
displayed when Dynamic Range
is set to Auto and Signal Status
is set to HLG, or when Dynamic
Range is set to HLG.
To Next Page
Loading...
