203
Setting Description
Direct Power On Turns on the projector when you plug it in
Sleep Mode Automatically places the projector in standby mode after an
interval of inactivity
Sleep Mode Timer Sets the time before the projector automatically turns off (Sleep
Mode must be turned on). If there is no active signal for a
certain amount of time, the projector will dim the light source
before the projector turns off.
High Altitude Mode Regulates the projector’s operating temperature at altitudes
above 4921 feet (1500 m)
Auto Source Search Automatically select an input source
Auto Power On If Computer1 or HDMI1 is selected, the projector turns on
when an input signal is detected from those ports
Startup Source Selects the image source to project when the projector is
turned on in Content Playback mode
Quick Startup Selects the time period in which you want to use Quick Start
mode, which lets you restart the projector within five seconds of
turning it off. You can select 20, 60, or 90 minutes of Quick
Start time. Press the power button to quickly restart the
projector in this mode.
USB Power Set to Always On to continue supplying power to the
commercially available streaming media player when the
projector is not projecting images.
A/V Mute Settings Adjusts the A/V Mute settings
A/V Mute Timer: turns off the projector automatically if A/V
Mute is enabled and 30 minutes of inactivity have passed
A/V Mute Release: select A/V Mute if you want to use only the
A/V Mute button to turn off A/V mute, or select Any Button to
use any button to turn it off
To Next Page
Loading...
