EasyManua.ls Logo

Epson EB-PU2116B - Lens Lock; Light Source Mode; Brightness Level; Constant Brightness

Epson EB-PU2116B
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings Menu
84
a
You can control projector button locking using the control panel
lock button on the control panel.
To unlock the buttons, hold down the [Enter] button on the control
panel for approximately 7 seconds. A message is displayed and the
lock is released.
Lens Lock
s Settings > Lock Setting > Lens Lock
You can disable [Lens Shift], [Zoom], and [Focus] button operations on the
remote control.
Light Source Mode
s Settings > Brightness Settings > Light Source Mode
s Extended > Multi-Projection > Screen Matching > Brightness Settings >
Light Source Mode
You can select the brightness for the light source.
Normal
Maximum brightness. This makes the light source operation time
approximately 20,000 hours.
Quiet
70% brightness with reduced fan noise. This makes the light source
operation time approximately 20,000 hours.
Extended
70% brightness and extends the life expectancy of the light source. This
makes the light source operation time approximately 30,000 hours.
Custom
You can select a custom brightness level.
a
Setting is only displayed when Constant Brightness is set to Off.
Brightness Level
s Settings > Brightness Settings > Brightness Level
s Extended > Multi-Projection > Screen Matching > Brightness Settings >
Brightness Level
You can select the Custom brightness level you want.
a
Setting is only displayed when Light Source Mode is set to Custom.
Constant Brightness
s Settings > Brightness Settings > Constant Brightness
s Extended > Multi-Projection > Screen Matching > Brightness Settings >
Constant Brightness
You can maintain the brightness of the light source set in the Brightness
Level setting.
a
Setting is only displayed when Light Source Mode is set to Custom.
When set to On, you cannot change the settings for Light Source
Mode and Brightness Level.
When set to Off, the Brightness Level setting changes according to
the status of the light source.
When you use this function, we recommend setting Energy Saving
Mode to Off.
s Settings > Brightness Settings > Energy Saving Mode

Table of Contents

Related product manuals