Epson EB-S18 User Manual

a
Turn on the projector, and then press the [LAN] button on the
remote control.
The LAN standby screen is displayed.
b
Check that the SSID and IP address information are displayed on
the LAN standby screen, and then remove the Wireless LAN
unit.
c
Connect the Quick Wireless Connection USB Key to the USB-A
port.
d
When the message "Network information update complete.
Remove the Quick Wireless Connection USB Key Adapter." is
displayed, remove the Quick Wireless Connection USB Key.
e
Reinstall the Wireless LAN unit on the projector.
f
Connect the Quick Wireless Connection USB Key to the computer
you are using.
For the steps from here on, see the User's Guide supplied with the
Quick Wireless Connection USB Key.
Connecting Equipment
28

Epson EB-S18 Specifications

General

Resolution	SVGA (800 x 600)
Weight	2.4 kg
Projection System	3LCD Technology
Projection Ratio	1.45 - 1.96:1
Brightness	3000 lumens
Contrast Ratio	10000:1
Lamp Life	5000 hours (Normal), 6000 hours (Eco)
Connectivity	USB 2.0 Type A, USB 2.0 Type B, VGA in, HDMI in, Composite in, S-Video in
LCD Panel	0.55-inch
Keystone Correction	Vertical ±30 degrees
Zoom	Digital
Projection Size	30 inches - 300 inches
Projection Distance Tele	0.88 m - 10.44 m
Security	Kensington lock
Colour Modes	Dynamic, Presentation, sRGB, Blackboard
Power Consumption	270 Watt
Dimensions	297 mm x 234 mm x 77 mm (Width x Depth x Height)