1515151515
The white frame is used to adjust
the commander, and the green
frame is used to adjust the
receiver.
D
Adjust the projection
position.
E
Adjust the focus for the commander and the receiver.
G
Correct keystone
distortion for the
receiver's frame (green).
Extend or retract the feet to
adjust the position.
The rear feet adjust the horizontal
tilt and the front foot adjusts the
height.
When suspended from a ceiling,
see the User's Guide supplied with
the ceiling mount.
Use the commander's focus
ring to adjust the focus for the
projected image.
Select Display the test pattern,
and then press the [
] button.
Select the projector you want to
adjust, and then press the [ ]
button.
The test pattern is displayed.
Use the focus ring on the
projector you want to adjust.
Select Perform keystone
correction for the Receiver.
Press the [Esc] button.
When you have nished
correcting the focus for the
commander and the receiver,
press the [Esc] button again.
F
Adjust the projection size for the receiver.
Use the receiver's zoom ring
to adjust the receiver's frame
(green) to the projection size you
want.
Adjustment point
Do not maximize the zoom
for the receiver because
the commander's frame
needs to be larger than the
receiver's frame.
See "Screen Size and
Projection Distance" on
page 18 to determine the
projection size.
Receiver
frame
Commander
frame
To Next Page
Loading...
