EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 78 Revision A
EB-FH06/FH52/E20/X49/W49/972/982W/992F/118, PL 119W,
EH-TW740/TW750
1. Remove the four screws ( ), the six screws ( ) or the one screw ( ), and
remove the "Rear Case".
2. Remove the "IF Label" from the "Rear Case".
Screws
Be careful at the time of assembly, as the two clasps of the
"Rear Case" may break.
Rear Case
IF Label
C.B.SCREW,3X8,F/NI
C.B.SCREW,3X6,F/ZB-3C
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
To Next Page
Loading...
