EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 81 Revision A
3. Remove the three (four) screws ( / ) from the top.
(EB-118 and PL 119W have the screws)
4. Remove the FFC, and then remove the "Upper Case (Assy)".
(See How to unlock connectors for FFC/FPC (p67))
Be careful as the FFC "SW Cable" is connected to the
switch board on the INT Duct side of the main unit.
Screws
Upper Case (Assy)
SW Cable
C.P.(S-P1)SCREW,2.5X6,F/ZN-3C
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
To Next Page
Loading...
