EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 83 Revision A
3. Remove the four screws ( / ) from the top.
4. Remove the FFC, and then remove the "Upper Case (Assy)".
(See How to unlock connectors for FFC/FPC (p67))
Be careful as the FFC "SW Cable" is connected to the
switch board on the INT Duct side of the main unit.
Screws
Upper Case (Assy)
SW Cable
C.P.(S-P1)SCREW,2.5X6,F/ZN-3C
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
To Next Page
Loading...
