Epson EB-X06 - Shortest Removal Procedures of Identified Failed Parts; Speaker

EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 137 Revision A
3.4 Shortest removal procedures of identified
failed parts
If you can identify a failed part, the following parts can be removed in shortest
ways different from the ordinal disassembling procedures.
3.4.1 Speaker
PART NAME
 Speaker 5W
(EB-E01/X06/W06/FH06/E10/X51/W51/W52/E20/X49/W49, EH-
TW740/TW750)
 Speaker 16W
(EB-FH52/972/982W/992F/118, PL 119W)
DISASSEMBLY PROCEDURE
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
Upper Case (Assy) (p80)
2. Remove the two screws ( ) and remove the "Speaker 5W".
(EB-E01/X06/W06/FH06/E10/X51/W51/W52/E20/X49/W49, EH-
TW740/TW750)
3. Remove the four screws ( ) and remove the "Speaker 16W".
(EB-FH52/972/982W/992F/118, PL 119W)
Speaker 5W
Speaker 16W
C.C.SCREW,3X6,F/ZN-3C
C.B.P-TITE SCREW,2.5X8,F/ZN-3C