EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480
Troubleshooting CONFIDENTIAL
SEIKO EPSON 30 Revision C
Warning Status
ON Blink OFF Varies according to the projector status
LED Status Cause Status/Check point
High Temp
Warning
This is not an abnormality. However, if the
temperature continues to rise higher afterwards,
projection stops automatically.
[Remedy]
Check that the air filter and the exhaust vent
are clear, and that the projector is not placed
against a wall.
If the air filter is clogged, clean or replace it.
Warning to
replace Lamp
Replace the lamp with a new one.
To Next Page
Loading...
Need help?
General
