Epson EB-Z10005U - Available Keystone Correction Range; Installation Angle

33
f
Available Keystone Correction Range
If the projector's angle of tilt is within the following range, you can correct distortion in the projected image
by using the H/V-Keystone correction function.
Product name
Screen
Position
Standard
zoom lens
ELPLS04
Short throw
zoom lens
ELPLU02
Rear
projection
wide lens
ELPLR04
Wide zoom
lens
ELPLW04
Middle throw
zoom lens
ELPLM06
Middle throw
zoom lens
ELPLM07
Long throw
zoom lens
ELPLL07
EB-Z10005U/
EB-Z10000U/
EB-Z9875U/
EB-Z9870U/
EB-Z9750U/
EB-Z11000W/
EB-Z9900W/
EB-Z9800W
Vertical
Direction
-30° to 30°
-24.5° to 24.5° -30° to 30°
Horizontal
Direction
-30° to 30°
-18.5° to 18.5° -30° to 30° -27.5° to 27.5° -30° to 30°
EB-Z11005/
EB-Z11000/
EB-Z9870
Vertical
Direction
-30° to 30°
-23.5° to 23.5° -30° to 30°
Horizontal
Direction
-30° to 30°
-18.5° to 18.5° -28° to 28° -26° to 26° -30° to 30°
f
Installation Angle
When a standard lamp is attached.
• Set Extended - Direction from the projector's Conguration menu according to the installation angle.
If this is not set, the the lamp's life may be reduced signicantly.
• Do not use the projector upside down.
When a lamp unit for portrait projection is installed
• If it is used at any angle other than those shown below, a malfunction or an accident could occur.
• When performing portrait projection, you do not need to set the Direction.