Epson EB-Z10005U - Page 37

37
ESC/VP21 Command List
When the power on command is transmitted to the projector, the power turns on and it enters warm-up
mode. When the projector's power has turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a ":", and then accepts the next
command.
If the command being processed terminates abnormally, an error message is output and a ":" is returned.
For more details on ESC VP21 commands, see the following Web site.
http://www.epson.jp/products/download/elp/escvp21_kyodaku.htm
Power on/o
Function Command
Response
Value
Content
Power on PWR ON
Power o PWR OFF
Power status query PWR? 00 Standby condition
01 Projecting
02 Warm-up status
03 Cooling status
04 Network monitoring status/communication status
05 Error standby status
09 Standby status (external output of images is possible)
Switch input source
Function Command
Setting Value/
Response
Value
Content
Switch input source SOURCE 10 Computer
Acquire input source SOURCE? 11 Computer RGB
14 Computer Component
1F Computer Auto
30 HDMI
40 Switch Video and S-Video
41 Video
42 S-Video
53 LAN
60 SDI
*
80 HDBaseT
A0 DVI-D
B0 BNC 5BNC
B1 BNC RGB
B4 BNC Component
F0 Switch to all input sources in order
F1 Switch to Computer, BNC, DVI-D, and LAN in order
F2 Switch to S-Video, Video, HDMI, HDBaseT, and SDI
*
in order
*
EB-Z10005U/EB-Z10000U/EB-Z9875U/EB-Z9870U only
Shutter function
Function Command Settings Content
Shutter function MUTE ON On
OFF O
On-Screen Display settings
Function Command Settings Content
On-Screen Display
ONSCREEN
ONSCREEN?
00 Do not display menus and messages
01 Display menus and messages