Epson EB-Z10005U - Page 47

47
PJLink Command List
See the following for more information on controlling the projector from a computer using PJLink protocols.
Function Command Setting Value/Response Value Content Notes
Power control
instruction
POWR 0 Power-o (Standby)
1 Power-on (Lamp-on)
Power status query POWR? 0 Power-o (Standby)
1 Power-on (Lamp-on)
2 Cooling status
3 Warm-up status
Input switch
instruction
Input switch query
INPT
INPT?
11 Computer
13 BNC
21 Video
22 S-Video
31 DVI-D
32 HDMI
34 SDI EB-Z10005U/EB-Z10000U/EB-
Z9875U/EB-Z9870U only
52 LAN
56 HDBaseT
Input toggling list
query
INST? 11 Computer
Displays a list of the available
input sources of the projector.
13 BNC
21 Video
22 S-Video
31 DVI-D
32 HDMI
34 SDI
52 LAN
56 HDBaseT
Error status query ERST? First character 2 Fan error
"0" is displayed when no error has
occurred.
Second
character
1 Lamp life warning
2 Lamp error Lamp failure
Third character 1 Temperature warning
2 Temperature error
Fourth
character
0 Cover open
(Does not apply to model being used.)
Fifth character 1 No Air Filter Warning
Filter Warning
2 Filter error
Sixth character 1 Other warnings
2 Other errors
Mute instruction AVMT 30 Image mute o Does not support video mute o/
on (10/11) or audio mute o/on
(20/21).
Mute status query AVMT? 31 Image mute on
Lamp number/
lighting hour query
LAMP? First number
(1 to 5)
0 to 99999 Cumulative lighting time of lamp 1
Second number 0 Lamp 1 O
1 Lamp 1 On
Third number
(1 to 5)
0 to 99999 Cumulative lighting time of lamp 2
Fourth number 0 Lamp 2 O
1 Lamp 2 On
Projector name
query
NAME? * * * Displays the name set in
Network - Basic - Projector
Name from the projector's
Conguration menu.
Manufacture name
information query
INF1? EPSON Manufacture name