Epson EB-Z10005U - Connecting Image Sources

Connecting Image Sources
To project video images, connect the computer using one of the following methods.
A
When using a commercially available BNC video cable (composite input)
Connect the video output port on the image source to the projector's Video input port.
B
When using a commercially available RCA video cable
Use a commercially available BNC/RCA adapter and connect the video output port on the image source to the projector's Video input port.
C
When using a commercially available S-video cable
Connect the S-video output port on the image source to the projector's S-Video input port.
D
When using an optional component video cable (D-sub/component converter)
s "Optional Accessories" p.198
Connect the component output port on the image source to the projector's Computer input port.
E
When using a commercially available component video cable (RCA) and BNC/RCA adapters
Connect the component output port on the video equipment to the projector's BNC input port (R/Cr/Pr, G/Y, B/Cb/Pb).
F
When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI input port.
G
When using a commercially available BNC video cable (SDI input, EB-Z10005U/EB-Z10000U/EB-Z9875U/EB-Z9870U only)
Connect the SDI port on the image source to the projector's SDI input port.
Connecting Equipment
42