Epson EB-Z10005U - Projecting Images; Automatically Detect Input Signals and Change the Projected Image (Search)

Automatically Detect Input Signals and Change
the Projected Image (Search)
Press the [Search] button on the remote control to project images from the
port currently receiving an image.
Remote control
* For EB-Z10005U/EB-Z10000U/EB-Z9875U/EB-Z9870U only
When multiple devices are connected, press the [Search] button on the
remote control until the target image is projected.
When video equipment is connected, make sure that the equipment is ready
to play, and then start this operation.
a
• You can make settings so that images are projected from the same
input port the next time the projector is turned on.
s Extended - Operation - Startup Source Search p.122
• The following screen is displayed while no image signals are input.
Projecting Images
58