Epson EB-Z8355WUNL - Adjusting the Projected Image; Displaying a Test Pattern

Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment. This is useful when installing a projector.
q
If the [User] button on the remote control is set to Test Pattern, the
test pattern will be displayed when the [User] button is pressed. (The
default setting is Test Pattern.)
Procedure
A During projection, press the [Menu] button. Select Settings -
"Test Pattern", then press the [Enter] button.
Using the Remote Control Using the Control Panel
B Press the [h] button on the remote control in the [r] direction
or press the [Enter] button on the control panel to switch the
test pattern.
To display the previous image, press the [
h] button on the remote
control in the [
l] direction.
Using the Remote Control Using the Control Panel
The following adjustments can be made while the test pattern is being
displayed.
Top Menu Sub Menu/Items
Image menu Color Mode s p.28
Abs. Color Temp.
Advanced
- Gamma
*1
s p.146
- RGB
- RGBCMY s p.146
Auto Iris
Adjusting the Projected Image
137