Adjust while viewing the image
Move the cursor on the projected image to the part where you want to
change the brightness, and adjust the value.
q
If you press the [Default] button while adjusting, the value that you
are adjusting is reset to the default.
Adjust using the gamma adjustment graph
Adjust while looking at the gamma adjustment graph.
q
If you press the [Default] button while adjusting, the value that you
are adjusting is reset to the default.
Frame Interpolation (EB-Z8455WU/Z8450WU only)
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
The menu is displayed in the following order.
Adjusting the Image Quality
147
To Next Page
Loading...
