Connecting a LAN Cable
Connect with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
Connected equip-
ment
Connecting cable Projector port
LAN port on network
hub
LAN cable (commercially
available)
LAN port
Attention
To prevent malfunctions, use a category 5 shielded LAN cable.
Connecting to an External Monitor
You can display computer images input from a computer on an external
monitor connected to the projector and the screen at the same time. This
means that you can check projected images on an external monitor when
giving presentations even if you cannot see the screen. Connect using the
cable supplied with the external monitor.
Connected equip-
ment
Connecting cable Projector port
Monitor Cable supplied with monitor Monitor Out port
q
• Only analog RGB signals from a computer connected to the
Computer input port or the BNC input port can be displayed on an
external monitor. Images from equipment connected to other ports
and component video signals cannot be displayed.
• The image cannot be displayed on the external monitor when the
projector is on standby.
• Setting gauges such as Keystone, the configuration menu, or Help
screens are not output to the external monitor.
Connecting to External Equipment
161
To Next Page
Loading...
