Epson EB-Z8355WUNL - Installing the Wireless LAN Unit (ELPAP07); Attaching

A
Install the cover along the guide.
B
Tighten the fixing screw.
Attention
• Install the front cover to use the projector.
• Store the projector with the lens unit installed.
If the projector is stored without the lens unit, dust and dirt may get inside the
projector and cause malfunctions or lower the quality of projection.
Installing the Wireless LAN Unit (ELPAP07)
Attaching
Procedure
A Remove the interface cover.
A
Loosen the fixing screw.
B
While pulling up the interface cover open switch, pull the interface cover
straight out.
B Install the Wireless LAN unit.
Installing Optional and Supplied Accessories
165