Procedure
A
Start E-Zoom.
Remote Control
B
Move the ( ) to the area of the image that you want to
enlarge.
Remote Control
C
Enlarge.
Remote Control
Each time the button is pressed, the area is expanded. You can
expand quickly by holding the button down.
You can reduce the enlarged image by pressing the [
x] button.
Press the [Esc] button to cancel.
q
• The enlargement ratio appears on the screen. The selected area can
be enlarged to between 1 to 4 times in 25 incremental steps.
• After the image is enlarged, it can be scrolled with the [
h
] button.
• E-Zoom is canceled when performing some functions such as
keystone or Auto Setup.
• When the Scale is set to On, the E-Zoom cannot be used.
Functions for Enhancing Projection
35
To Next Page
Loading...
