When WPA/WPA2-PSK is selected
Sub Menu Function
Passphrase
You can enter at least 8 and up to 63 single-byte alphanumeric characters for the passphrase. When the passphrase is entered and the [Enter] button is
pressed, the value is set and displayed as an asterisk (*).
When using it with EasyMP Network Projection, you do not need to input the passphrase in the computer if it is the initial (default) passphrase.
It is recommended to change the passphrase periodically for the purpose of security. If the network settings are initialized, it returns to the initial
passphrase. s p.76
You cannot enter more than 32 characters on the configuration menu. When setting from Web Control, you can enter more than 32 characters.
s p.109
In Quick mode, the initial passphrase is set.
Network Menu
67
To Next Page
Loading...
